Getting Started with Harmony v3 Peripheral Libraries on SAM9X60 MPUs
In this tutorial, you will download, configure, and build an MPLAB® Harmony 3 Software Framework application to run on the SAM9X60-EK Evaluation Kit using the MPLAB X Integrated Development Environment (IDE) in Debug mode.
Once the application has been fully developed, the application is cleaned and built for production. The resulting binary image (harmony.bin) is written to Non-Volatile Memory (NVM), such as SD memory card, eMMC, NAND, or NOR Flash memories. The harmony.bin binary image is read from NVM by the second-stage bootloader, at91bootstrap, which is also written to NVM. However, at91boostrap must be configured and built for a given NVM.
For more information refer the links below.
Web Links
- Getting Started with Harmony v3 Peripheral Libraries on SAM9X60 EK Evaluation Board
- Getting Started with Harmony v3 Peripheral Libraries on SAM9X60 Curiosity Developmen Board
