1.2.6.4.8 SRV_USI_PROTOCOL_ID Enum

typedef enum
{
    /* PRIME Manager generic */
    SRV_USI_PROT_ID_MNGP_PRIME                = 0x00,

    /* PRIME Manager: GETQRY */
    SRV_USI_PROT_ID_MNGP_PRIME_GETQRY         = 0x00,

    /* PRIME Manager: GETRSP */
    SRV_USI_PROT_ID_MNGP_PRIME_GETRSP         = 0x01,

    /* PRIME Manager: SET */
    SRV_USI_PROT_ID_MNGP_PRIME_SET            = 0x02,

    /* PRIME Manager: RESET */
    SRV_USI_PROT_ID_MNGP_PRIME_RESET          = 0x03,

    /* PRIME Manager: REBOOT */
    SRV_USI_PROT_ID_MNGP_PRIME_REBOOT         = 0x04,

    /* PRIME Manager: Firmware Upgrade */
    SRV_USI_PROT_ID_MNGP_PRIME_FU             = 0x05,

    /* PRIME Manager: GETQRY enhanced */
    SRV_USI_PROT_ID_MNGP_PRIME_GETQRY_EN      = 0x06,

    /* PRIME Manager: GETRSP enhanced */
    SRV_USI_PROT_ID_MNGP_PRIME_GETRSP_EN      = 0x07,

    /* PRIME Sniffer */
    SRV_USI_PROT_ID_SNIF_PRIME                = 0x13,

    /* PRIME PHY Serial */
    SRV_USI_PROT_ID_PHY_SERIAL_PRIME          = 0x1F,

    /* Physical Layer  */
    SRV_USI_PROT_ID_PHY                       = 0x22,

    /* G3 Sniffer  */
    SRV_USI_PROT_ID_SNIFF_G3                  = 0x23,

    /* G3 MAC layer  */
    SRV_USI_PROT_ID_MAC_G3                    = 0x24,

    /* G3 ADP layer  */
    SRV_USI_PROT_ID_ADP_G3                    = 0x25,

    /* G3 Coordinator  */
    SRV_USI_PROT_ID_COORD_G3                  = 0x26,

    /* MicroPLC Physical Layer  */
    SRV_USI_PROT_ID_PHY_MICROPLC              = 0x27,

    /* PRIME API  */
    SRV_USI_PROT_ID_PRIME_API                 = 0x30,

    /* Invalid protocol  */
    SRV_USI_PROT_ID_INVALID                   = 0xFF

} SRV_USI_PROTOCOL_ID;

List of available USI protocols.

This data type defines the identifier required to specify the protocol to use by USI service.

None.