1.27.25.4 1.34.25.4 1.35.18.4 TWIHSx_TransferSetup Function

C

/* x = TWIHS instance number */

/* TWIHS master mode */
bool TWIHSx_TransferSetup(TWIHS_TRANSFER_SETUP* setup, uint32_t srcClkFreq)

Summary

Dynamic setup of TWIHS Peripheral.

Description

This API is generally used when there are multiple clients on the same TWIHS bus having different clock speed. In such a case, the TWIHSx_TransferSetup API must be called to set the appropriate bus speed before starting the transfer for the I2C slave.

Precondition

TWIHSx_Initialize must have been called for the associated TWIHS instance. The transfer status should not be busy.

Parameters

Returns

true - Transfer setup was updated Successfully.

false - Failure while updating transfer setup.

Example

TWIHS_TRANSFER_SETUP setup;

setup.clkSpeed = 400000;

// Make sure that the TWIHS is not busy before changing the TWIHS clock frequency
if (TWIHS1_IsBusy() == false)
{
    if (TWIHS1_TransferSetup( &setup, 0 ) == true)
    {
        // Transfer Setup updated successfully
    }
}

Remarks

srcClkFreq overrides any change in the peripheral clock frequency. If configured to zero PLIB takes the peripheral clock frequency from MHC.