SPI EEPROM AT25 driver - EEPROM Read Write

This example application shows how to use the AT25 driver to perform read and write operations on AT25 series of EEPROM

Description

This example uses the AT25 driver to communicate with the SPI based AT25 series of external EEPROMs to perform write and read operations in Bare-Metal environment.

Downloading and building the application

To clone or download this application from Github, go to the main page of this repository and then click Clone button to clone this repository or download as zip file. This content can also be downloaded using content manager by following these instructions.

Path of the application within the repository is apps/driver/spi_eeprom/at25/at25_eeprom_read_write/firmware .

To build the application, refer to the following table and open the project using its IDE.

Setting up the hardware

The following table shows the target hardware for the application projects.

• To run the demo, the following additional hardware are required:
  • One EEPROM 4 Click board

Setting up Curiosity PIC32MX470 Development Board

• Connect mini USB cable to the ‘Debug USB’ connector(J3) on the board to the computer
• Install the EEPROM 4 Click board on to the mikroBUS socket J5 of Curiosity PIC32MX470 Development Board
• Note: Ensure that the series resistors on the mikroBUS headers are of value 0 Ohms

Setting up PIC32MX274 XLP Starter Kit

• Connect micro USB cable to the ‘Debug USB’ connector(J9) on the board to the computer
• Install the EEPROM 4 Click board on to the mikroBUS socket J5 of PIC32MX274 XLP Starter Kit

Running the Application

1. Build and program the application using its IDE
2. The LED is turned ON when the value read from EEPROM matches with the written data

Refer to the following table for LED name:

---