Mbed OS RTOS basic

This example application blinks an LED to show the Mbed OS RTOS threads that are running and to indicate status

Description

This demonstration creates a task which toggle an LED for every 500 ms.

Downloading and building the application

To clone or download these applications from Github, go to the main page of this repository and then click Clone button to clone this repository or download as zip file. This content can also be downloaded using content manager by following these instructions

Path of the application within the repository is apps/basic_mbed_os_rtos/firmware/

To build the application, refer to the following table and open the project using its IDE.

Setting up the hardware

The following table shows the target hardware for the application projects.

Setting up SAM D21 Xplained Pro Evaluation Kit

• Connect the Debug USB port on the board to the computer using a micro USB cable

Setting up SAM E54 Xplained Pro Evaluation Kit

• Connect the Debug USB port on the board to the computer using a micro USB cable

Setting up SAM E70 Xplained Ultra Evaluation Kit

• Connect the Debug USB port on the board to the computer using a micro USB cable

Running the Application

1. Build and program the application using the MPLAB X IDE
2. The LED indicates the success or failure.
   • The LED toggles on success i.e. for every 500 ms.

Refer to the following table for LED name:

---