Microchip logo Harmony logo small

Microchip MPLAB® Harmony 3 Release Notes

Vision Release v3.1.0

dynamically configure CSI N lanes & Bit rate
Add Applications demo for sama7G5-ek board
Replace Width and Height Image sensor MCC configuration with Resolution configuration
Add an vision application demo to support SOM1EK board
set register values using same macro defined in all MPU headers.
source code indent & formatting.
fix configuring Image sensor’s
Sony IMX219 reset not working
indent & format source code.
regenerate libcamera_display vision application code.
SAMA7G5: saving frames to MSD is very slow.
add new api to start and stop ISC capture
add a api to get FPS info.
Fix IMX219 to output 30fps for vga resolution
add bin file to git attributes.
fix build error’s observed due to changes in ISC.h header file
use printf to print debug messages on console.
add WVGA resolution support
add image sensor i2c mode support
update ISC default values based on the MPU type in MCC configurations.
configure ISC Hsync and Vsync polorities values
configure ISC white balance values
Hue and Saturation is not supported for sama5d2
Fix image sensor detect
configure camera pwd gpio pin.
configure ISC Gamma values
fix build errors for SAMA5D2 som1 ek1 board
fix compilation error’s based on ISC interface type.
code cleanup
reduce DMA_MAX_BUFFERS size.
Add an vision application demo to support WL SOM1EK board
generate offline docs for vision 3.1.0 release
Configure Gamma correction only if input format type is Bayer Pattern

Adds Harmony 3 component to support MIPI-C-PHY peripheral
Adds Harmony 3 component to support Image Sensor peripheral
Adds Harmony 3 component to support Sony IMX219 Camera Module
Adds libCamera Demo for SAM9X75-DDR3-EB Early Access Evaluation Board using the MIPI CSI interface to capture video frames from the Sony IMX219 Camera Module and display it on to the AC69T88A LVDS display